Inspection

A 500 sqft climate controlled inspection room housing our CMM's will insure all specifications are met. All tools are calibrated per ISO requirements.

Equipment


CMM's

Altera S 10.7.6 with CMM Manager

  • Capacity: 40 x 28 x 24
  • Volumetric Accuracy: from 1.8µm + L/400
  • Repeatability: from 1.7µm

Mitutoyo Bright M707 with Geomeasure

  • Capacity: 28 x 28 x 24
  • Volumetric Accuracy: from 3.5µm + 4.0L/1000
  • Repeatability: from 4µm

FaroArm Platinum with CAM2 Measure

  • Capacity: 12ft
  • Single Point Articulation Performance Test: ± .0024"
  • Volumetric Maximum Deviation: ± .0034"

LK Altera S 10.7.6

FaroArm Platinum


Leak Testing

Leybold Inficon UL 200 Helium Leak Detector

  • Smallest detectable He leak rate: < 3 x 10-10 mbar·l·s--1
  • Leak rate measurement range: 1 x 10-11 to 1 x 10-1 mbar·l·s--1

Helium Leak Detector


Other Tools

(1) 6’ x 12’ Starrett Pink Granite Surface Plate

(1) 4’ x 8’ Starrett Pink Granite Surface Plate

(3) 2’ x 3’ Surface Plates on the Shop Floor

(1) 10” x 12” x 16” Angle

(1) 24” Digital Height Gage

(1) 24” Dial Height Gages

(1) 40” Dial Height Gages

(1) 60” Vernier Calipers

(2) Grade 2 81pc Gage Blocks

(1) Pin Gages .011 to 1.000

(2) 5” Sine Bar

(4) Dial Indicators

(2) Set Micrometers

(4) Chamfer Gage

(2) Bevel Protractors

(12) 1 2 3 Blocks

(1) Set Thread Gages

(1) 24” x 36” Surface Plate

(1) Set 0” to 18” Carbide Tip Micrometer

(2) Digital Caliper 24”

(2) Sets Gauge Blocks

(2) Digital 0” - 1” Micrometer

(2) Digital 1” - 2” Micrometer

(2) 6” Digital Calipers

(2) 12” Digital Calipers

(1) Mitutoyo Comparator

(1) Micro-VU Model H-14 Comparator

(1) Taylor Hobson Surftronic 3 Profilometer

(1) 12” Height Micrometer

Micro-VU Model H-14 Comparator

Mechanical Inspection